Bit PDC
Fitur tina bit PDC
1, Cocog pikeun pangeboran sedeng pikeun formasi sedeng-teuas.
2, Evolute asymmetrical design cutter agul jeung beban bit saimbang sahingga bit whirl dicegah.
3, panyalindungan gage komposit jeung desain torsi low ngaronjatkeun laju penetrasi.
4, Desain kasaimbangan hidrolik CFD nyababkeun beberesih bit anu langkung saé sareng panyabutan motong.
5, utilization digabungkeun tina kinerja tinggi PDC compacts nyata prolongs umur bit
6, Jumlah nozzle anu langkung luhur sareng / atanapi palabuhan tetep pikeun ngalayanan beberesih, pendinginan sareng évakuasi cuttingssyarat kalawanflows.Allows hidrolik sadia pikeun laju aliran luhur kalawan kanaékan minimal dina tekanan pompa.
fitur: Inten anu impregnated dina matrix balik cutters PDC
Mangpaat: Ngaronjatkeun footage dibor dina aplikasi abrasive
| Tipe Bit | 6” | 8-1/2" | 8-1/2" | 12-1/4" | Tipe Bit | 17-1/2 ”GM1606T |
| Kodeu IADC | M423 | M432M332 | M323 | M432 M332 | Kodeu IADC | M323 |
| Sabeulah | 5 | 6 | 8 | 6 | Sabeulah | 6 |
| Ukuran Cutter (mm) | Φ13 MM | Φ16 MM | Φ13 MM | Φ16MM | Ukuran Cutter (mm) | Φ16MM;Φ13MM |
| Nozzle Qty / Jinis | 5 | 13.2 | 9.6 | 30.78 | Cutter Qty | Φ16×58;Φ13×81 |
| Nozzle Qty / Jinis | 3NZ | 6NZ | 4NZ | 6NZ | Nozzle Qty / Jinis | 8NZ |
| Gauge Panjang | 1,5" | 2.2" | 2” | 2,5" | Gauge Panjang (mm) | 110 |
| Sambungan | 3-1 / 2 "API REG | 4-1 / 2 "API REG | 4-1 / 2 "API REG | 6-5 / 8 "API REG | Sambungan | 7-5 / 8 "API REG |
| Torsi Makeup (KN.m) | 10.4~11.4 | 24.1~26.5 | 24.1~26.5 | 51.7~56.9 | NW/GW(KG) | 338/388 |
| Laju Rotary (rpm) | 60-260 | 60-260 | 60-260 | 60-260 | Ukuran Nozzle (inci) | 10/32 |
| Beurat dina Bit (KN) | 8-50 | 20-100 | 20-100 | 30-140 | Laju Rotary (Rpm) | 60-260 |
| Max.WOB(KN) | 90 | 130 | 130 | 180 | Beurat Dina Bit (KN) | 30-200 |
| Laju Aliran (lps) | 10-30 | 22-35 | 22-35 | 38-70 | Max.WOB (KN) | 240 |
| Laju Aliran (lps) | 45-80 | |||||
| Di luhur aya ukuran biasa pikeun rujukan anjeun.Ukuran bisa ngaropéa sakumaha per sarat Anjeun. | ||||||
